CT-8002S-5V100mA-124

For Coin Cells, Super Capacitors, Three-Electrode Systems Testing and etc.

NEWARE-Battery Tester

CT-8000 Battery Testing System

Flawless in milliseconds, precision beyond limits.

Consumer Electronics

Coin Cells

Monitor & Alarm System

Unit modularity, powerful performance.

Voltage Accuracy
±0.01% F.S.

Current Accuracy

±0.01% F.S.

Recording Frequency

100Hz

Current Response Time

≤1ms

Minimum Pulse Width

500ms

Off-Line Test

1GB/CH

Stable performance parameters to ensure accurate and reliable test data. At the same time, the product adopts modular design with each unit having 2 channels, which can be independently data acquisition.

All-around product tour.

4-range switching,
precision defined.

4 current ranges from 0.5μA ~ 0.1mA, 0.1mA ~ 1mA, 1mA ~

10mA , 10mA ~100mA can be selected to realize the

controllable accuracy of small current in small range.

Perpetual dedication to safety protection.

● Discharge Data Protection

● Offline Testing Function

● Voltage Upper Limit Setting

● Voltage Lower Limit Setting

● Current Upper Limit Setting

● Current Lower Limit Setting

● Capacity Upper Limit Setting

● Delay Time Setting

Tiny current, magnified vision

Delicate measurements at μA-level current, uncovering the

essence of testing.

Work scenarios simulated.
Enhanced data support.

Based on NEWARE 5th generation test system architecture, it

can perform Cycle Life Test, Rate Charging / Discharging Test,

Pulse Simulation Test, HPPC, etc. Meanwhile, it can simulate the

actual driving road conditions of electric vehicles by dynamic

power or current waveform.

Cycle Life Test

Rate Charging / Discharging Test

Pulse Simulation Test

HPPC

Multiple testing modes.
One equipment, unlimited capabilities.

Cycle Life Test

Rate Charging/Discharging Test

Pulse Simulation Test

GITT Test

DCIR Test

dQ/dV Curve

Tailored for advanced battery testing: enabling dQ/dV differential capacity curve analysis capability.

Powerful programmability.
Meet diverse testing needs.

The software is fully functional, covering a variety of work-step settings, recording, and data storage to meet a wide range of testing needs.

DBC Configuration

Support import/edit/export of DBC files. Different battery pack protocols can be communicated by simply modifying the code of the DBC protocol file without upgrading the program.

CC & CV charge/discharge test

CC charging or discharging until the voltage reaches the specified value, and then seamlessly switching to CV mode for battery compensation which is smooth without any spikes.

500ms pulse width

Testing the performance of the battery under fast changes in current/power.

Segmented recording

Allow to set up to 3 segment recording conditions per step, including voltage, current and time.

Extensive peripheral devices.
Create a multi-dimensional testing environment.

Integrated peripheral devices such as Auxiliary Voltage, Auxiliary

Temperature, and Environmental TestChambers for

comprehensive testing and evaluation, providing multi-

dimensional and quantifiable support for battery mass

production testing.

Technical Specifications

quipment name	Portable Battery Testing System
Model	CT-8002S-5V100mA-124
Resolution	AD：24bit；DA：16bit
Voltage
Output range	-5V-5V
Min discharge voltage	-5V
Accuracy	± 0.01% of F.S.
Stability	0.02% of F.S.
Current
Output range	Range1: 0.1mA; Range2: 1mA; Range3: 5mA; Range4: 10mA; Range5: 50mA; Range6: 100mA
Accuracy	± 0.01% of F.S.
Minimum output current	0.2μA
CV cut-off current	Range1: 0.1μA; Range2: 1μA; Range3: 5μA; Range4: 10μA; Range5: 50μA; Range6: 0.1mA
Stability	0.02% of F.S.
Power
Single channel output power	0.5W
Accuracy	±0.02% of F.S.
Stability	0.04% of F.S.